Independent buying guides for backyard astronomy

Neewer LCD Display Shutter Release Wired Timer Remote NW-880 N3 for Canon EOS 7D 5D 1D 6D 50D 40D Review (2026)

Updated September 14, 2026 · Research-based review

Our verdict

The NW-880/N3 pairs a four-line backlit LCD with a wired N3 connector for Canon's higher-end EOS bodies like the 7D and 5D series, giving enthusiast shooters a clear interval and bulb timer. It will not physically fit Canon's entry-level Rebel bodies or non-Canon cameras, so check your port style first.

Neewer LCD Display Shutter Release Wired Timer Remote NW-880 N3 for Canon EOS 7D 5D 1D 6D 50D 40D

Neewer NW-880 N3 LCD display wired timer remote for Canon EOS 7D, 5D, 1D, 6D, 50D and 40D.

Price range: $ (Budget)

What we liked

  • + N3 connection fits higher-end Canon EOS bodies
  • + LCD display makes programming intervals straightforward
  • + Wired remote avoids wireless dropouts during long sequences

Trade-offs

  • - Wired cable limits distance from the camera
  • - Only compatible with Canon N3 port cameras

Who this N3 remote is built for

The NW-880/N3 is built for Canon's higher-end EOS bodies that use the N3-style round remote port, listed as compatible with the 7D, 5D series, 1D, 6D, 50D, 40D, 30D, 20D and 10D. That makes it the right pick for enthusiast and semi-pro Canon shooters who have moved past the entry-level Rebel line and its smaller E3-style jack. Astrophotographers running long bulb exposures or interval sequences on one of these bodies get a wired controller with a proper LCD readout rather than a basic cord timer. Owners of Canon's consumer DSLRs like the Rebel series, or Nikon and Pentax bodies, should look at a different Neewer remote, since the N3 connector on this unit will not physically fit those cameras.

Specs and design in plain English

This is a wired remote with a four-line backlit LCD panel that displays self-timer delay, exposure length, interval and shot count at the same time, powered by two AAA batteries. Timer delays, exposure times and intervals can each be set up to 99 hours, 59 minutes and 59 seconds in one-second steps, and shot count can be set anywhere from one to 399 frames or left unlimited. The unit gives an audible beep during the final three seconds of a countdown or interval, which helps confirm the sequence is running without needing to watch the screen constantly. Because it supports full bulb mode timing, it is suited to long single exposures for faint deep sky targets as well as rapid-interval timelapse sequences for night-sky trails or the Milky Way.

Living with it after dark

Setup is a straightforward plug into the camera's N3 port, then stepping through the four LCD fields to set delay, exposure, interval and shot count before starting the sequence. The backlit display is useful at night since settings can be checked without a headlamp washing out your night vision, and the countdown beep gives an audible cue that a shot or interval has started. Being a wired remote, there is no pairing step and no risk of a wireless signal dropping mid-sequence, though the cord limits how far you can step away from the tripod. Owners running very long overnight sequences should carry spare AAA batteries, since a four-line backlit display draws more power than a simple non-backlit cord timer and can drain a set faster over several hours.

Trade-offs and how it compares

Against Neewer's Canon E3-connector LCD remote built for the Rebel series, the N3 version targets a distinctly different set of camera bodies, so the two are not interchangeable and the choice comes down to which port your specific Canon body uses. Compared with the plain shutter release cord also sold by Neewer for entry-level Canon bodies, the NW-880/N3 offers a fuller four-line display and an audible countdown beep, at the cost of being limited to N3-equipped bodies only. Build quality follows the rest of the Neewer lineup, functional plastic construction rather than metal, so the cord and port connector deserve careful handling rather than sharp bends or being yanked free. Shooters who value a clear multi-line display over a bare-bones cord timer will likely find the extra features worth the narrower compatibility list.

Verdict and who should look elsewhere

For Canon shooters with an N3-equipped body such as the 7D, 5D series, 1D, 6D, 50D or 40D, the NW-880/N3 is a capable dedicated intervalometer with a genuinely useful LCD display, matching our score of 8.4 out of 10 for fit and features. It is not compatible with Canon's entry-level Rebel bodies or with Nikon and Pentax cameras, all of which need a different connector entirely, so double-check your camera's port style before ordering. Photographers who only need occasional single-shot delays may find a simpler, cheaper cord timer sufficient, while those running frequent overnight interval sequences will appreciate the audible cues and multi-line display here. Overall it is a sensible, focused choice for its specific camera range.

Frequently asked questions

What does N3 mean on this remote?

N3 refers to the round remote port used on Canon's higher-end EOS bodies like the 7D, 5D series, 1D, 6D, 50D and 40D, as opposed to the smaller E3 jack found on Canon's entry-level Rebel cameras.

Can I set an unlimited number of shots?

Yes, the shot count can be set anywhere from one to 399 frames, or set to unlimited for sequences that should keep running until you stop them manually.

Does it beep during a countdown?

Yes, it gives an audible beep during the final three seconds of a countdown delay or interval, which helps confirm the sequence is progressing without watching the screen.

Will this work on a Canon Rebel body?

No, Rebel-series and other entry-level Canon bodies use a different, smaller connector, so this N3 version will not physically connect to them.

Prices change often, so check the current price and availability on Amazon.

Check price on Amazon

Stargazer Nest may earn a commission from the link above.